The processing method of the surface of the cnc workpiece depends first on the technical requirements of the machined surface. However, it should be noted that these technical requirements are not necessarily the requirements specified in the parts drawing, and may sometimes be higher than the requirements on the part drawing in some respects due to process reasons. If the benchmarks do not coincide, the processing requirements for the surface of some cnc workpieces are increased. Or because of being a fine benchmark, it is possible to impose higher processing requirements on it.
When the technical requirements of the surface of each cnc workpiece are clarified, the final processing method that can ensure the requirement can be selected accordingly, and the processing method requiring several steps and steps can be determined. The selected cnc processing part processing method should meet the requirements of part quality, good processing economy and high production efficiency. To this end, the following factors should be considered when choosing a processing method:
1. The processing precision and surface roughness that can be obtained by any kind of cnc processing method have a considerable range, but only in a narrow range is economical. The processing precision of this range is economic processing precision. For this reason, when selecting a processing method, the corresponding processing method that can obtain economic processing precision should be selected.
2, to consider the nature of cnc processing materials.
3. Consider the structural shape and size of the cnc workpiece.
4. Consider productivity and economic requirements. When mass production is large, high-efficiency and advanced processes should be adopted. It is even possible to fundamentally change the manufacturing method of the blank, which can reduce the labor of machining.
5. Consider the existing equipment and technical conditions of the factory or workshop. When selecting the processing method, make full use of the existing equipment, tap the potential of the enterprise, and give full play to the enthusiasm and creativity of the workers. However, consideration should also be given to continually improving existing processing methods and equipment, adopting new technologies and improving process levels.
Lemo has over 40 cnc machining centers, include 3 axis,4 axis , 5 axis.We are expert on Custom metal parts, CNC machined parts, precision machining, aluminum machining, CNC machining ,CNC milling, CNC turning processing, precision grinding and so on.
pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]: www.ptjmachining.com
Previous: How to make five-axis cnc processing simpleNext: What are the methods for removing rust from CNC precision parts?
Link to this article：Cnc machining parts surface processing method selection factors to be considered
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks