Elimination of transmission gear clearance in CNC machining feed system

The transmission gear in the cnc machining machine feed system must eliminate the transmission gap between the meshing gears as much as possible. Otherwise, the movement will lag behind the command signal after each reversal of the feed system, which will affect the machining accuracy. There are two common methods for eliminating the gap of the transmission gear by CNC machining machines.
Rigid adjustment method
The rigid adjustment method is an adjustment method that adjusts the back tooth gap without automatic compensation. Therefore, the gear circumference tolerance and tooth thickness should be strictly controlled, otherwise the transmission flexibility will be affected. The adjustment method has a relatively simple structure and a good transmission rigidity.
Lemo has over 40 CNC machining centers, include 3 axis,4 axis , 5 axis.We are expert on CNC machining ,CNC milling, CNC turning processing, precision grinding
 pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]: www.ptjmachining.com
Previous: CNC machining machine motor and screw connectionNext: Cnc processing lathe rolling guide

Link to this article:Elimination of transmission gear clearance in CNC machining feed system

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki,Thanks

Author: 122 122