Stainless Sheet Metal Fabrication division of labor and operation are required to have clear rules, according to open the figure and the bulk is not the same as the selection of different blanking methods, Sheet Metal Fabrication methods are laser, CNC punch, cutting plate, mold and other methods, today Xiaobian On the details for everyone to tell the stainless Sheet Metal Fabrication manufacturing rules.
1, select the blanking, after the completion of the next process, stainless steel is not the same according to the processing of the workpiece into the corresponding process;2, the bend should be the first to be based on the scale of the drawings, the thickness of stainless steel material to determine the use of bending and the knife slot, to prevent the product and the collision caused by the deformation of the upper mold is the key to the election (in the same product , May use different types of upper mold), the choice of the next model based on the thickness of the plate to determine;3, riveting, the height of the stud to think about the same as the same mold, and then press the pressure to adjust the pressure to ensure that the stud and the workpiece surface flush, to prevent the stud did not press firmly or press out of the workpiece surface , The formation of the workpiece void. Welding with argon arc welding, spot welding, carbon dioxide maintenance welding, electric arc welding, etc., spot welding should first consider the orientation of the workpiece welding in the production of stainless steel sheet metal to do when the design of the tooling to ensure that the location of precision welding;4, in order to weld strong, in the workpiece to be bumped on the bump, can make the bumps in the welding before welding with the flat uniform to ensure that the same point of heating together, together can determine the welding position, the same, to be welded , To adjust the pre-pressure moment, keep the pressure moment, keep the moment, rest moment, to ensure that the workpiece can be spot welding solid;The quality of stainless Sheet Metal Fabrication in addition to the strict requirements in the production process, the demand is independent of the production of quality inspection, one by strict rules of the scale, the second is strict control of the appearance of quality. This Sheet Metal Fabrication is not a big thing, or out of the role is very aspiring. This can be found in the process of stainless Sheet Metal Fabrication to open the map fault, bad habits in the process, the process of fault.
Previous: Complex Sheet Metal Fabrication TechniquesNext: Quality Analysis Of Special – Shaped Sheet Metal Fabrication Materials
Link to this article：Manufacture Rules For Stainless Sheet Metal Fabrication
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks