surface roughness

Surface Ra of different Plastic
molding material Ra   index arrange μm
0.012 0.025 0.05 0.1 0.2 0.4 0.8 1.6 3.2 6.3 12.5 25
inject Thermoplastics PMMA 0.025 0.05 0.1 0.2 0.4 0.8 1.6
ABS 0.025 0.05 0.1 0.2 0.4 0.8 1.6
AS 0.025 0.05 0.1 0.2 0.4 0.8 1.6
PC 0.05 0.1 0.2 0.4 0.8 1.6
PS 0.05 0.1 0.2 0.4 0.8 1.6 3.2
PP 0.1 0.2 0.4 0.8 1.6
PA 0.1 0.2 0.4 0.8 1.6
PE 0.1 0.2 0.4 0.8 1.6 3.2 6.3
POM 0.05 0.1 0.2 0.4 0.8 1.6 3.2
PSU 0.2 0.4 0.8 1.6 3.2
PVC 0.2 0.4 0.8 1.6 3.2
PPO 0.2 0.4 0.8 1.6 3.2
Chlorinated polyether 0.2 0.4 0.8 1.6 3.2
PBT 0.2 0.4 0.8 1.6 3.2
Thermosetting Aminoplasts 0.2 0.4 0.8 1.6 3.2
phenolics 0.2 0.4 0.8 1.6 3.2
silicone plastic 0.2 0.4 0.8 1.6 3.2
press Aminoplasts 0.2 0.4 0.8 1.6 3.2
phenolics 0.2 0.4 0.8 1.6 3.2
Melamine 0.1 0.2 0.4 0.8
Silicone plastic 0.2 0.4 0.8
DAP 0.4 0.8 1.6 3.2
Unsaturated polyester 0.4 0.8 1.6 3.2
Epoxy plastic 0.2 0.4 0.8 1.6 3.2
Plexiglass 0.025 0.05 0.1 0.2 0.4 0.8 1.6 3.2 6.3
PA 1.6 3.2 6.3 12.5
PTFE 0.8 1.6 3.2 6.3 12.5
PVC 1.6 3.2 6.3 12.5
Reinforced plastics 1.6 3.2 6.3 12.5 25
August 18, 2020 plastic mold

Link to this article:surface roughness

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

Author: 122 122