It is possible to process continuous, smooth free-form surfaces that cannot be machined in general three-axis or that are difficult to machine in one setup. Such as aero-engine and steam turbine blades, propellers for ships, and many shells and molds with special curved surfaces and complex cavities, holes, etc., such as ordinary three-axis CNC, due to the tool relative to the workpiece The pose angle cannot be changed during the machining process. When machining some complex free-form surfaces, it is possible to generate interference or under-process (ie, not process). When machining with a five-axis machine tool, since the position angle of the tool/workpiece can be adjusted at any time during the machining process, the interference of the tool workpiece can be avoided and all the machining can be completed in one clamping;
Lemo has over 40 cnc machining centers, include 3 axis,4 axis , 5 axis.We are expert on CNC machining ,CNC milling, CNC turning processing, precision grinding
pls conttact us as below :Amy ChenDongguan Lemo Precision Metal Products Co.,LtdDirect Phone: 86-137 1326 2409
Skype: amyptjEmail: [email protected]: www.ptjmachining.com
Previous: Is the CNC machining center good or the engraving and milling machine?Next: How to make five-axis cnc processing simple
Link to this article：What are the advantages of cnc processing compared to general CNC machining?
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:Mold Wiki，Thanks